How to clean your Rugs and upholstery?

Cleaning your rugs and upholstery with the BISSELL Little Green Multi-Purpose Portable Carpet and Upholstery Cleaner (Model 1400B) is straightforward and efficient. Here’s a step-by-step guide to ensure you get the best results:

  1. Preparation:

    • Fill the Clean Water Tank: Remove the clean water tank from the unit. Fill it with hot tap water up to the marked line. Then, add the appropriate amount of BISSELL cleaning solution (refer to the solution bottle for exact measurements). Replace the tank securely back into the cleaner.
    • Attach the Hose and Tools: Ensure the cleaning tool (such as the tough stain tool or crevice tool) is securely attached to the hose.
  2. Pre-Treatment (Optional):

    • For heavily soiled areas, you might want to pre-treat the spots with a BISSELL pre-treat spray. Spray the area and let it sit for a few minutes before proceeding with cleaning.
  3. Cleaning:

    • Turn On the Cleaner: Plug in the BISSELL Little Green and turn it on.
    • Apply Cleaning Solution: Hold the cleaning tool a few inches above the surface you’re cleaning. Press the trigger to spray the cleaning solution onto the area.
    • Scrub the Surface: Gently scrub the area using the brush attached to the cleaning tool. The bristles help to lift dirt and stains from the fibers.
    • Extract the Dirty Water: Release the trigger and slowly move the cleaning tool over the treated area to extract the dirty water. Make sure to go over the area several times to remove as much moisture as possible.
  4. Repeat if Necessary:

    • For stubborn stains or heavily soiled areas, you might need to repeat the cleaning process. Reapply the cleaning solution, scrub, and extract the dirty water until the area is clean.
  5. Post-Cleaning:

    • Empty and Rinse Dirty Water Tank: Once you’re done, remove the dirty water tank, empty it, and rinse it out with clean water. This prevents odors and keeps your cleaner in good condition.
    • Clean the Tools and Hose: Detach the cleaning tools and rinse them under running water. Allow them to dry completely before storing.
    • Wipe Down the Cleaner: Use a damp cloth to wipe down the exterior of the BISSELL Little Green to keep it clean and ready for future use.
  6. Drying:

    • Allow the cleaned area to air dry completely before using it again. To speed up the drying process, you can use fans or open windows if possible.

By following these steps, your rugs and upholstery will be thoroughly cleaned and refreshed, thanks to the BISSELL Little Green Multi-Purpose Portable Carpet and Upholstery Cleaner.

Comments

No comments yet. Why don’t you start the discussion?

Leave a Reply

Your email address will not be published. Required fields are marked *